Trailer tire clearance

[cford36]

I have a 7500# trailer. The concern I have is that I have noticed that it does not seem that there is room for full travel before the tires will rub the fenders. I just replaced the tires, same size but upgraded from C range to D. The tires do extended slightly outside the fenders. When fully loaded I cannot put my finger between the tire and fender, so when going over something they appear to rub the fender.

What should be the normal clearance? I am considering moving the fenders up higher for more clearance. I will post pictures when I get some.

 

[Diamondpilot]

What size tires are on it now? A 7500# trailer should have 205/75/15 or 14's. A 225 is usually too big and causes the issue you are having.

Chris

 

[cford36]

They are 205/75/15, same as the the ones I took off. Only difference is the load range, which I don't think should make a difference in size.

 

[cford36]

These are the old tires but it looked the same unloaded.

 

[pjb09]

It looks like your axles are several inches too wide for your trailer frame.

 

[Diamondpilot]

These are the old tires but it looked the same unloaded. <img src="http://www.tractorbynet.com/forums/files/trailers-transportation/381955-trailer-tire-clearance-img_0204a-jpg"/>

Yours look like the same amount of clearance and bow legged as mine. I think your axles will hit the frame before you hit the fenders.

Chris

 

[Diamondpilot]

Here is a pic of mine loaded down and they never rub.

Chris

 

[tcartwri]

I have on one trailer taken an adjustable wrench and radiused the fender lip where there may be contact with the sidewall. If you do small bends at a time it looks pretty good.

 

[bearskinner]

or remove the fenders and space them out slightly, if they are not welded on