Tractor backhoe - homemade

[Beltman60]

You Sir have earned it

 

[BFreaky]

Thank you .
Well, finally there was a deep dig task... We installed some large diameter drainage pipes. Depth of the pit was 4 meters

 

[KubotainNH]

Sweet, I like action photos.

 

[BFreaky]

Well it's made for action

 

[ericher69]

Thank you . Well, finally there was a deep dig task... We installed some large diameter drainage pipes. Depth of the pit was 4 meters

BFreaky;

Backhoe looks wonderful and powerful!

Gonna be the safety police here but please review the following link;

Object moved

Seen too many people hurt in my line of work because they didn't know any better.

Stay safe!

Sent from my iPhone 5s 64Gb using TractorByNet

 

[BFreaky]

Thanks butbdon't worry. There were no people in the pit when the pipes went in. They are only removing the cables. We have alot of gravel in our soil so I did not permit them to go inside longer than necessary and that was a few minutes. I was more worried about the cables because those pipes are metal net and thick concrete and are very heavy

 

[TomSeller]

The big danger would have been when disconnecting cables on the lower one. That is pretty deep. A slough off could easily kill someone. You can't just scoop the dirt off of someone in a situation Ike that and there are only minutes to deal with.

 

[Fodimar]

Hello

Great contribution to the forum.
Is it possible to buy from you diy-hoe?
I mean prefabricated metal parts and hydraulics needed.
Customer will do welding and assembly work.

Just an idea....

 

[BFreaky]

Well I like the idea but this is a prototype, the first of a kind...so at this point I cant answer that question because its a "yes" and a "no"... it would be better to buy a finished assembled product because of its complexity

 

[Jose G]

you could sell the plan, you probably have CAD files already since most of your parts are CNC cut.

 

[BFreaky]

Then I should probably patent it first...?

 

[hddnis]

Then I should probably patent it first...?

I don't think you have anything to patent with the backhoe design.

You can copyright the plans and files for CNC cutting. That is basically asking people to not turn around and sell them as their own. It is expensive to enforce if they try to sell them anyway. Government does very little to enforce either patents or copyright, it is your expense to bring a civil suit and in most cases your damages are too minor to warrant the expense.



Mr. HE

 

[hddnis]

Double post......

 

[rScotty]

I don't think you have anything to patent with the backhoe design.

You can copyright the plans and files for CNC cutting. That is basically asking people to not turn around and sell them as their own. It is expensive to enforce if they try to sell them anyway. Government does very little to enforce either patents or copyright, it is your expense to bring a civil suit and in most cases your damages are too minor to warrant the expense.
Mr. HE

Good points, Mr. HE. I have some experience that might help BFreaky, having patented several devices and also copyrighted a few designs in my career. In both processes I learned more about them than I ever really wanted to know. Yes, I agree that both processes vary widly from one country to the next.

Even definitions of what is and isn't patentable varies. In general, a patent is description of a unique way of doing something that represents an improvement on current practice. Copyrights differ in that they are more oriented towards works of art or design. And yes, both can overlap. Patents are juried - that is, before being issued they are required to be reviewed by a peer group. A copyright is not juried; anyone can simply put the symbol on his own work that says to the world that this artist wants to retain his own exclusive ownership of his own original work.
A patent has a humanitarian orientation in that it is intended to grant the patentee a defined period of exclusive use of the improvement in exchange for which the patentee agrees to publish that improvement so that anyone can use it.
Copyrights have a less well defined period of exclusivity, are more self-serving as they don't carry any obligation to make the work public property.

All of this is vague because of the different ways that different countries view both processes. And that changes over time as well. As Mr. HE points out, many governments do little or nothing to enforce either one even to their own citizens - and even less for anything of foreign origin. There may even be countries where foreign patents and copyrights are not recognized as exclusive. If so, it would be quite legal for people in that country to sell copies of any work without any obligation toward the inventor/artist.
So, the lack of enforcement is quite common. Expect it. Several otherwise modern countries don't even make a pretense.

IMHO, if you do want to sell plans your best bet is to copyright your work and then to advertise that you will provide good plans for a fair price. I know that sounds to simple to be good advice, but personal popularity and integrity are still just about the best protection any artist can have...... and both are free. For that matter, the entire copyright process itself is free - since it is just a symbol along with your name and a date all intended to signify that your intent is to retain ownership of your work.

Your copyright also keeps someone else from being able to copy your work and then denying your authorship.......that being one of those odd and quixotic possibilities that can be entertaining to ponder.
Best of luck with it,
rScotty

 

[varmint]

Mr. RScotty, that is a thorough and useful exposition on CR and patent reality! When my brother developed a novel, and likely patentable new type of valve assembly for geo thermal installations, his investigations into patenting it basically told him that he could invest in patents, but they would prove essentially useless, as a well funded corporation could easily make small changes and then just let their legal staff deal with whatever came up. Then there's China.

 

[TomSeller]

While it is a very nice backhoe it is fundamentally similar to every other backhoe out there, not something that I think you could take out a patent on in the first place. As has been mentioned copyrights and patents in today's international manufacturing world don't protect much of anything. The advantage today goes to those countries who can quickly copy innovative ideas, manufacture cheaper and distribute better whatever it is. This is not your grandfather's world.

 

[Gale Hawkins]

Thank you .
Well, finally there was a deep dig task... We installed some large diameter drainage pipes. Depth of the pit was 4 meters

Man that is a work of art. Thanks for sharing.

 

[BFreaky]

Some hard work. Digging some concrete foundations and a slab. It's no problem for rk_525 .
After I got it all out, I crushed it with "jaws" and buried it on site.

Digging a trench. This narrow bucket penetrates the soil as if it was water

 

[Sodo]

I'm sure that in 80 pages this must've been said before but my gawd that must be satisfying to dig that hole with your own creation!

 

[Colonel Monk]

Killer. Great design style, and something that is often missing from that type of equipment.

Idea on mass-produced equip and such is that straight lines are easier and cheaper to cut, but I think with all the CNC plasma/laser/waterjet tables out there it really isn't the case any longer.

Long sweeping curves have a great effect on reducing stress concentrations in materials as well. I'll bet BFreaky's backhoe is stronger than most as a result of the curves. Beautiful

I have noticed that more and more modern tractors are beginning to get a little more curvy.

CM

PS - sure, you can get too curvy. pleasure boats here in the US are starting to have the profile of a football, you can't even stand on the side decks anymore which is pretty worthless. ...