tooth bar
- Thread starter jimbo64
- Start date
- Views: 2667
KYDan
Platinum Member
Any toothbar can be broken. Flat toothbars are not as durable and rugged as standard ones. I don't know if one particular brand outshines the others or not. I have two, a flat one and a regular one. I only using the flat one for finish work. They do make your bucket more functional for digging, brush removal, and maintaining a flat and level cut. I prefer pin on teeth over the dimpled.
dex3361
Elite Member
- Joined
- Aug 22, 2008
- Messages
- 3,551
- Location
- N. of Charleston WV
- Tractor
- Kubota L4400-1 HST,FEL, 3x3 remotes, TNT. BX1500 54 mmm
I have been impressed with the tooth bar I bought from Iowa Farm Equipment
GPintheMitten
Elite Member
- Joined
- Sep 8, 2009
- Messages
- 3,331
- Location
- Flushing, Michigan
- Tractor
- Kubota B2620 with BH65 backhoe, Ford 2N
Have you checked out the Ratchet Rake?
Grateful11
Veteran Member
deminin
Silver Member
I've had a tooth bar on my B2910/LA402 for 9 years. I replaced the teeth once..they are pin attached. I use the tooth bar extensively for digging...everything from cleaning a ditch to digging out stumps. The tooth bar is probably the handiest attachment I own. I'm not sure what brand it is...I bought it from my Kubota dealer shortly after I tried digging with just the bucket.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 29,579
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
A lot of us bought Markam tooth bars for our SCUT...
Never heard of anyone having a failure.
I know mine has gotten a lot of hard use from prying rocks apart.
Never heard of anyone having a failure.
I know mine has gotten a lot of hard use from prying rocks apart.
Scotty Dive
Veteran Member
I just picked this one up. I have not put it through its paces yet, but its built well with pin on teeth
http://www.tractorbynet.com/forums/...yone-have-united-steel-works.html#post2692089
http://www.tractorbynet.com/forums/...yone-have-united-steel-works.html#post2692089
markam bought out by another outfit= heard not as good- dealing with markam was a good experience
JJLash
New member
I agree with jimbo64. I bought a Markham (now Gator Attachments) and love. It has side pin cast teeth instead of side pin fabricated teeth. I dig in creek gravel quite a bit and its never disappointed me or shown much sign of wear. I like it so much when I sold it with my tractor last year, I actually called the buyer and bought it back when I could not buy a new one from Gator for my new tractor. They could not get side pin cast teeth for quite some time last summer. I actually bought it back for half the price of a new Gator. :thumbsup:
Ron JD670
Silver Member
- Joined
- Jan 20, 2012
- Messages
- 143
- Location
- Jacksonville in S. Oregon
- Tractor
- for Cristmas 2011 found used Joh Deere 670 w/ 40 hrs and options
I recently ordered a WRLong flat tooth bar
http://www.wrlonginc.com/FTB.htm
based on feed back from a greentractotalk (a JohnDeere forum)
http://www.****************.com/for...cket-Tooth-Bar-for-1000-series-120-FEL/page2&
After getting stalled digging red clay without a tooth blade, i did some research and selected this in part because it can be used to back blade level. Some tooth bars do not allow this and needs to be removed. When I get it installed and in use I will try to take pictures and post.
http://www.wrlonginc.com/FTB.htm
based on feed back from a greentractotalk (a JohnDeere forum)
http://www.****************.com/for...cket-Tooth-Bar-for-1000-series-120-FEL/page2&
After getting stalled digging red clay without a tooth blade, i did some research and selected this in part because it can be used to back blade level. Some tooth bars do not allow this and needs to be removed. When I get it installed and in use I will try to take pictures and post.
