Tooth bar for Kioti 72" bucket?

[k0ua]

Eric it looks good, what are your overall impression's so far of the tractor and the hitch for that matter.

 

[MinnesotaEric]

Eric it looks good, what are your overall impression's so far of the tractor and the hitch for that matter.

I have zero impressions at this time because I haven't used the tractor for anything. The quick hitch is 140 pounds and readily fit onto my 3 pt (once I had the right size SpeeCo top pin). The NX has many, many hole combinations in the stabilizer bars and so I was able to center the Quick Hitch.

My tractor didn't come with a manual and so and I decided to stay in the city and study for the broker exam and sign up to take it next week. Unfortunately, my driveway was sealed today and if off limits for at least 24 hours. As a result, I'm not tearing into the tractor to begin installing things.

My biggest concern is where to mount the 3rd function valve and get the fittings all right. I plan to use a 16 gpm D03 valve and I need to determine the location so I know what sub plate to use. To do that the seat must come out and the tractor must be on my driveway.

Because of the missing owner's manual, I don't even know what size for type the quick disconnects are. Bummer.

 

[murphy1244]

I don't even know what size for type the quick disconnects are.

I believe they are ISO 7241-1 1/2 inch

 

[MinnesotaEric]

I don't even know what size for type the quick disconnects are.

I believe they are ISO 7241-1 1/2 inch

There is an ISO 7241-1 A series and an ISO 7241-1 B series. if you happen to know, can you tell me what series A or B? Thanks.

 

[murphy1244]

A series Eric. Also called 600series