Todays shop time.

   / Todays shop time.
  • Thread Starter
#411  
4750, I’m curious to see how you clamp your initial glue-up? Can you share? Nice project!

Tape. IMG_0808.JPG
 
   / Todays shop time. #414  
1/64th scale...

Anyway, I spent a few hours in my shop today building a shelf unit for my pantry... It will clean up and organize it a bit.

I built it out of some "mis-cuts" off the BSM, I always set them aside, just for a job like this.

SR
 
   / Todays shop time.
  • Thread Starter
#415  
I turned 2 more pieces tonight. The maple piece would have had a nicer profile if it had 1" off the bottom but it was rough turned too deep for that. Anyway most non wood turners don't notice profile or wall thickness unless it's awful. It's pretty satisfying pulling nice curly shavings off dry wood. IMG_0828.JPG
 

Attachments

  • IMG_0830.JPG
    IMG_0830.JPG
    1.8 MB · Views: 170
  • IMG_0829.JPG
    IMG_0829.JPG
    1.9 MB · Views: 179
   / Todays shop time. #416  
I once had a neighbor 35 years ago when I worked in the woods, he made these bowls out of wood. One day while bringing out wood with a skidder I saw a big 2'-ish burl on a side of a tree, after work I went back in and cut it down, of course the boss had to ask what I was doing, told him my neighbor buys these burls, ok he said.

Next day I come to the job site and the boss ask what I got for that burl, I said $150.00, he goes WHAT!!, he was thinking like I was, $10-$20.00, and yes I thought I did alright since I was only getting $5.30/hr. Well he told his boss and that was the end of that, a message came down to all 5 of us, from now on ALL burls will be turned into the company, it was a small sawmill company with it's own wood harvesting crew, I no longer cared looking for tree burls while on the job after that, and that sawmill co is long gone now and so isn't that bowl turning neighbor.
 
   / Todays shop time.
  • Thread Starter
#417  
Here's a cherry burl I found. I haven't turned it yet to see what it looks like. IMG_0820.JPG
 
   / Todays shop time.
  • Thread Starter
#419  
I turned the rolling pins. I still need to make handles. IMG_0831.JPGIMG_0832.JPGIMG_0834.JPGIMG_0835.JPG
 

Tractor & Equipment Auctions

2020 Ram 1500 4x4 Crew Cab Pickup Truck (A50323)
2020 Ram 1500 4x4...
2006 Nissan Titan Crew Cab Pickup Truck (A50323)
2006 Nissan Titan...
2025 GIYI GY-X380 Trencher Mini Skid Steer Attachment (A50322)
2025 GIYI GY-X380...
2016 Isuzu NPR-HD Morgan 24ft Box Truck (A50323)
2016 Isuzu NPR-HD...
(4) 12' & 10' Corral Panels (A50515)
(4) 12' & 10'...
2020 New Holland 105 Workmaster MFWD Compact Tractor with 632TL Front Loader - Poultry Special (A52748)
2020 New Holland...
 
Top