tncruzin
Bronze Member
Are there any repairs available for a tire with a cut and the tube slightly bulging through the hole? I know with car tires they can put a boot on the inside sometimes.
Tires and Tubes
- Thread starter tncruzin
- Start date
- Views: 907
rdbrumfield
Veteran Member
I have used that method in the past. I'm sure your local tire shop can fix you up.
normde2001
Elite Member
- Joined
- Mar 10, 2002
- Messages
- 4,159
I'm sure there are. I have seen some really big boots for truck tires.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
In the past I've seen tractor tires that were laced up with bailing wire on the sidewall.. then had a huge thick boot, or even a section o fthe old tube laid out on the inside, and a new tube.. Ok, for slow moving tractor.. NOT ok for anything going down the highway!
Soundguy
Soundguy
