Remounting front tire

[Topzide]

Here's one for the smaller tires and wheels that won't break the bank! Under $400 on Ebay. 10" to 22" wheels.

 

[Too many Kubotas]

I had a low tire the other day, which I noticed about four feet too late.

Being lazy I decided to fix it on the spot. Would've been a lot more work without the bead blaster. Used a Milwaukee M18 compressor.

 

[Lena]

Ive got a 27x8.5-15 R14 that apparently was low, and it came off wheel. Now, I have remounted a car tire in the past, but it was a real pain. I just spend about 1 hour fooling with this, any tricks?

I tired two large wrenches working around; I tried a bottle jack in 1 spot and working around with wrenches; i tried soaping to make it easier. Im not completely against taking it somewhere, but its Sunday, and i have a full week of work coming up,

I have used vice grips. once you get the tire started on the rim, clamp the rim with the vice grips. This stops the tire from from sliding off the rim as you continue to work your way around putting the tire back on.

 

[Fuddyduddy1952]

 

[Jeff Pizzi]

Ive got a 27x8.5-15 R14 that apparently was low, and it came off wheel. Now, I have remounted a car tire in the past, but it was a real pain. I just spend about 1 hour fooling with this, any tricks?

I tired two large wrenches working around; I tried a bottle jack in 1 spot and working around with wrenches; i tried soaping to make it easier. Im not completely against taking it somewhere, but its Sunday, and i have a full week of work coming up,

I set my wheel and tire under my loader. A little pressure and it went right on. This was after I was quoted $60 to install a new valve. $14 and I had a valve and a valve tool.