BeeferMan
Gold Member
Long story, but I got an A300 to use for a while, but with zero documentation, and I've never had a skidsteer before. One tire had gone flat and unseated the bead, got that seated and inflated, but I have no idea what the tire pressure should be for this beast?
Machine is low hours, but has not been well cared for. Been picking away at some maintenance/repair items - hydraulic front attachment mechanism was toast, had to remove and reinstall some of the bushings in the loader so it would take grease, etc. Found a full set of new teeth for the bucket in the bottom of the cab, but no pins, so that's the next job...
This machine is quite a work horse, the 4 wheel steering is great...
Machine is low hours, but has not been well cared for. Been picking away at some maintenance/repair items - hydraulic front attachment mechanism was toast, had to remove and reinstall some of the bushings in the loader so it would take grease, etc. Found a full set of new teeth for the bucket in the bottom of the cab, but no pins, so that's the next job...
This machine is quite a work horse, the 4 wheel steering is great...
