Walter Bostic
New member
Would someone suggest a suitable tiller for a Farmall Super A tractor? I own a 1950's model with 3 point hitch.
Tiller tiller for Super A
- Thread starter Walter Bostic
- Start date
- Views: 7210
TractorToolsDirect
Advertiser
You've got about 16 hp at the PTO, so I wouldn't suggest anything too large. Normally you would want something at least as wide as the tractor, but you may not have the hp to run something that wide. Check out the Caroni compact tillers, they are heavy built and a good value: Tractor Tools Direct | Product Categories | Tillers
Birdhunter1
Veteran Member
The hardest part might be hooking a 3 point mounted tiller to your tractor as (if memory serves correctly) the PTO shaft on the tractor is offset to the left side of the machine inline with the engine and trans. I don't think it will work.
Sawyer Rob
Super Member
Just offset the tiller to get the pto alinement you need...
That will put the tiller over to cover that sides tire track too, so it works out just fine.
SR
That will put the tiller over to cover that sides tire track too, so it works out just fine.
SR
Last edited:
OP
Walter Bostic
New member
I was looking at a 4 foot wide. My soil is sandy (Eastern NC) and has been farmed for many years. Do you think the 4 foot filler would work. I do not think hooking it up would be an issue. I now use a bush hog with the tractor.
Sawyer Rob
Super Member
I think a 48" will be fine, as long as you make sure the pto shaft is long enough... I think the pto will be higher than on a modern tractor so make sure you have a long enough pto shaft...
I have both, an A and also a 140, but I've never run a tiller on either one...
SR
I have both, an A and also a 140, but I've never run a tiller on either one...
SR
showcattle
Gold Member
Will a Super A have a slow enough ground speed?
Sawyer Rob
Super Member
It should be fine, as he said he has sand and the ground has been worked in the past. Most folks til at too slow of a speed anyway, destroying their soil structure!
Also, the A does have a 4 speed tranny...
SR
Also, the A does have a 4 speed tranny...
SR
OP
Walter Bostic
New member
A used equipment shop salesman told me my tractor was to fast, but another mechanic told me it would be OK. I am kinda confused. Why can't I till the same ground two times if it does not do the job on the first pass. That is what I do with the disc.
jenkinsph
Super Star Member
I agree that most people over till and destroy the soil structure, rarely do I see anyone but myself use the higher ground speeds in my locale.
That said, with only 16 hp. at the pto. and 2.3 mph in 1st gear the engine may have a hard time with a 48" tiller.
showcattle
Gold Member
I'm worried about stalling the engine because ground speed is too fast.
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 7,401
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
If the ground speed is too fast, the tiller can't dig-in to bog the engine down. It will float/bounce on top of the ground and try to push you faster.
Sawyer Rob
Super Member
You can, and in most cases, SHOULD! Instead of crawling along pounding the soil to death!
SR
OP
Walter Bostic
New member
Just got back so, sorry I am late responding. Looks like I am back where I started. I do not want to have to purchase a tiller to determine if it will work on the tractor. Does anyone have a super A with a 4ft tiller?
Sawyer Rob
Super Member
Almost all of my custom tilling is at about 2.5mph and one of my tillers is a 42" Howard, that I run with 12.5 pto hp tinker toy tractor... It does just fine, so I don't see a super A having trouble with a 48" tiller, in sand no less and sand is easy to till!...
SR
