tighten belts?

   / tighten belts? #1  

sergeant69

New member
Joined
Nov 22, 2013
Messages
16
Location
south texas
Tractor
troy bilt horse and pony
seems like the belts are slipping/squealing a little too easily. put an 8 HP Honda on a 71 horse!. belts are new. can the distance between the upper and lower pulleys be increased? thanks
 
   / tighten belts? #2  
seems like the belts are slipping/squealing a little too easily. put an 8 HP Honda on a 71 horse!. belts are new. can the distance between the upper and lower pulleys be increased? thanks

Try following the attached link. I did not use the " tool" they refer to, i just adjusted back and forth until the belts stopes squealing and yet it shifted into position easily. The link may nt be exactly like yours, but it should be close. I don't know which model that is.

http://manuals.mtdproducts.com/mtd/GetFile.do?filename=horsebeltadjustment.pdf

Also some instructions on the reverse disc yo asked about previously.

http://service.mtdproducts.com/references/reverse_disk_service.pdf
 
   / tighten belts?
  • Thread Starter
#3  
cool. exactly what I needed. thanks!
 
   / tighten belts? #4  
cool. exactly what I needed. thanks!

Like I mentioned, don't get too worried about the tool they have, just adjust back and forth until you get it not to squeal but stay in position. Good luck.
 

Tractor & Equipment Auctions

2002 VOLVO L150F WHEEL LOADER (A51406)
2002 VOLVO L150F...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A53421)
2025 Kivel 48in...
2012 DOOSAN G25 GENERATOR (A55745)
2012 DOOSAN G25...
Red Iron Oxide in Trace Mineral Supplements for Cattle
Red Iron Oxide in...
2025 Electric Cart (A55853)
2025 Electric Cart...
2011 MAGNUM PRODUCTS LIGHT PLANT/TANK TRAILER (A53843)
2011 MAGNUM...
 
Top