1948berg
Gold Member
- Joined
- Feb 3, 2006
- Messages
- 410
- Location
- Southern Norway
- Tractor
- A Fergie-MF 35 gas- Mf 165- Mf 6161- Unimog- Fiat 880
I forgot, it also can be hooked on and off, just locked with 2 screws, no welding at all!
Thumb Thumb for JD TLB110
- Thread starter CurlyDave
- Start date
- Views: 3174
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,585
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
Thx for posting the photos, dubba. I am amazed that the JD factory thumb is so poorly designed. The 110 is a great machine, though out of the league of most of us with non-industrial tractors. That said, I love the new mechanical thumb that I fabricated for my Prairie Dog hoe. Every hoe should have a thumb!
zigmond
New member
im thinking of getting a mechanical thumb for my 110
from http://cgi.ebay.com/THUMB-SKID-STEER-EXCAVATOR-BOBCAT-16-05_W0QQitemZ7602150888QQcategoryZ26199QQcmdZViewItem
buy it know of 250.00 and they have all different sizes.
i have a 24" bucket do you know what size i would need/best ?
thanks ziggy
from http://cgi.ebay.com/THUMB-SKID-STEER-EXCAVATOR-BOBCAT-16-05_W0QQitemZ7602150888QQcategoryZ26199QQcmdZViewItem
buy it know of 250.00 and they have all different sizes.
i have a 24" bucket do you know what size i would need/best ?
thanks ziggy
dfkrug
Super Member
- Joined
- Feb 3, 2004
- Messages
- 7,585
- Location
- Santa Cruz Mtns, CA
- Tractor
- 05 Kioti CK30HST w/ Prairie Dog backhoe, XN08 mini-X
Helix has been selling those thumbs on Ebay for a while. Since you have to weld the brackets onto your dipper stick, make sure the thumb is long enough to reach outside of the teeth of your bucket. If you are going to be picking up rocks, I recommend welding some harder steel onto the thumb teeth. I used small backhoe teeth.
zigmond
New member
my bucket is 24 inch from dipperstick to the teeth
do u think 20x5 inch thumb will work?
good idea with teeth i going to do that thanks /forums/images/graemlins/smile.gifjavascript:void(0)
javascript:void(0)
do u think 20x5 inch thumb will work?
good idea with teeth i going to do that thanks /forums/images/graemlins/smile.gifjavascript:void(0)
javascript:void(0)
Fergy42286
New member
How exactly is the hose for the thumb run, because i just got my 110 Friday and the thumb hose is already wearing against the bolt on the hoe. /forums/images/graemlins/confused.gif Any help is apreciated.
Brian
Brian
dubba
Gold Member
I'm guessing that your having this problem?
I'm having a hard time not flaming JD over this one... I just stopped by my dealer & mentioned the problem & they fixed it under warranty. All they did was make the hose 4" longer.
I'm having a hard time not flaming JD over this one... I just stopped by my dealer & mentioned the problem & they fixed it under warranty. All they did was make the hose 4" longer.
Fergy42286
New member
Exactly my problem, I called the dealer already and they said they would fix it. I will tell them how they fixed yours, I'll get them to put protective sheathing around the line as well. Other than this little glitch, i love this machine. Thanks
