Threads on KAMA Rear Remotes

[3RRL]

Anybody know what threads are on the rear remotes on a KAMA KM554? I want to remove the rear remotes QD and thread the hose ends into another fitting. They appear to be 22mm x 1.5mm pitch but I'm just guessing. Where would I get a coupler to go from that thread to say a 1/2NPT?

Also, what about the ports on the rear remote valve to those hoses, what thread are they?
Thanks,

 

[bluechip]

as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.

 

[3RRL]

as I recall 22mm 1.5 is correct. We have adaptors to 1/2NPT available.

Thanks Chip,
The Metric thread that screws into the rear remote valve...is it Male or Female?
Thanks,

 

[bluechip]

The quick connect has a female thread which attaches to the male thread on the tractor. I am talking about the quick connects not the valve under the floor. the fitting has a 1/2" male thread and you can mount a pioneer type quick connect in its place. The valve has female ports, but I am unsure the size, some are banjo type fittings also.