those hyd connectors

[dieselade]

I have a 32o5 and a 4310. the loader was on the 4310 and went to put the loader on the 32o5 and the female hyd receivers are a different size. what a bummer that was/is...what is jd thinking?????my question is...what is the best way to handle this, get a new set of female recievers for the 3205 to match the loader male tips, or get new male loader tips to match the 3205?

 

[kennyd]

You should change the smaller couplers to the larger size.

 

[wippster]

You may even be able to purchase adapters that plug between the 2 different sizes! In the farming world there is alot of different adapters for all types of different application. Of course anytime you reduce line diameter you'll reduce flow rate!

 

[RoyJackson]

I'd go with Kenny's suggestion, especially if this is a permanent swap or you expect to do this swap frequently.

Make sure you have a drain pan and a couple plastic caps (to plug the hydraulic line when you remove the QD) handy.