The line up

[tkh159]

Hello all I wanted some thoughts and opinions on three kioti models.

First off I use to have a 2004 DK40 manual, so now looking into HST transmission

I have the compared the CK4010, DK4210 and DK4710

http://www.kioti.com/wp-content/themes/2016-main/compareModels.php?models=11115,11379,11421

I know what the DK40 was capable of but since it wasn't a HST it had more PTO power and hydraulic flow of 12.5 gpm so it's hard to make an equal comparison.

Those two specs are very important as I want to operate a medium duty single spindle 5 foot rotary cutter and 2485 backhoe.

Ok got that out of the way....the ck4010 has more PTO power than the DK4210 but the DK4210 has more hydraulic flow than the CK4010

Pretty sure all three are capable of a medium duty single spindle 5' rotary cutter but unfortunately the ck4010 may not power a 2485 backhoe.

So the question is what would I miss if I purchased a DK4210 over a DK4710??? The DK4710 has roughly 5 more engine horsepower than the DK4210 and has about 4 more PTO power than the DK4210.

Any thoughts or experience is very much appreciated.