TG1860 snowblower

   / TG1860 snowblower #1  

psk125

New member
Joined
Apr 27, 2024
Messages
7
Tractor
Kubota TG1860
Have the quick-hitch and blower, along with the manual for the blower. Have found some diagrams (thank you Messick's and Coleman Equipment) that show the arrangement of the TG2739A quick hitch and can guess as to how it has to go under the tractor. There do not seem to be any manuals or diagrams showing how the manual lifting arm for the snowblower attaches to the blower, quick hitch or tractor however. No pertinent Youtube videos either. Can someone please explain or post a photo or drawing of this for me? Or tell me where to look? The lack of support from Kubota on this is quite frustrating. It's like they want it kept a secret.
 
   / TG1860 snowblower #2  
Have the quick-hitch and blower, along with the manual for the blower. Have found some diagrams (thank you Messick's and Coleman Equipment) that show the arrangement of the TG2739A quick hitch and can guess as to how it has to go under the tractor. There do not seem to be any manuals or diagrams showing how the manual lifting arm for the snowblower attaches to the blower, quick hitch or tractor however. No pertinent Youtube videos either. Can someone please explain or post a photo or drawing of this for me? Or tell me where to look? The lack of support from Kubota on this is quite frustrating. It's like they want it kept a secret.

You might look here for help:
 
   / TG1860 snowblower
  • Thread Starter
#3  
You might look here for help:
Thanks for the lead. Read through the thread and saw that many people have similar problems figuring out how it goes. The directions in the manual aren't overly clear and not everyone seems sure they have all the parts they need. The different versions are also confusing. Pictures posted in the thread that might have been helpful have succumbed to link rot so will try following the directions as best I can. They start by saying to remove the upper and lower pulleys, install a "mid-hub", and then put the pullies back on... Given that it's a used machine, there's hope that step has already been done. I don't have a "mid-hub" lying around loose.
 
   / TG1860 snowblower #4  
Thanks for the lead. Read through the thread and saw that many people have similar problems figuring out how it goes. The directions in the manual aren't overly clear and not everyone seems sure they have all the parts they need. The different versions are also confusing. Pictures posted in the thread that might have been helpful have succumbed to link rot so will try following the directions as best I can. They start by saying to remove the upper and lower pulleys, install a "mid-hub", and then put the pullies back on... Given that it's a used machine, there's hope that step has already been done. I don't have a "mid-hub" lying around loose.

You could try a PM to the posters on that thread and see if they respond. They may still have the photos or maybe some help for you.

Richard
 

Tractor & Equipment Auctions

2009 FREIGHTLINER CASCADIA SLEEPER (A51222)
2009 FREIGHTLINER...
2015 MACK GU713 DAYCAB (A50854)
2015 MACK GU713...
John Deere 2700 5 Bottom Plow (A50514)
John Deere 2700 5...
2000 MACK RD688 TRI AXLE DUMP  TRUCK (A51222)
2000 MACK RD688...
2007 John Deere TX 4x2 Utility Gator (A49346)
2007 John Deere TX...
2007 Mauldin MT-500 T/A Tack Trailer (A49461)
2007 Mauldin...
 
Top