Bradability
New member
I purchased an older Terramite T5B recently. The front Tie Rod ends are worn out as well as the bearings. Does anyone know any cross references to standard part numbers so I can purchase these locally?
Terramite T5B Help Please
- Thread starter Bradability
- Start date
- Views: 5212
the old grind
Super Member
- Joined
- Jul 21, 2012
- Messages
- 5,308
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
:welcome:
I haven't replaced tie rod ends, but others here have. It may be easier to take the old ones to the auto parts shop. Counter kids should be able to do more than ring up a sale, but times have changed and some may be need help from the guy 'over 30' if you don't offer a 'make and model'.
Bearings can be found easily online. Cross-able etched numbers may be readable on side of the races. If you don't have a digital caliper to measure ID, OD, and width, get help from a friend who does.
Giving us more info about your location may help someone near you steer you to the right place(s).
I haven't replaced tie rod ends, but others here have. It may be easier to take the old ones to the auto parts shop. Counter kids should be able to do more than ring up a sale, but times have changed and some may be need help from the guy 'over 30' if you don't offer a 'make and model'.
Bearings can be found easily online. Cross-able etched numbers may be readable on side of the races. If you don't have a digital caliper to measure ID, OD, and width, get help from a friend who does.
Giving us more info about your location may help someone near you steer you to the right place(s).
the old grind
Super Member
- Joined
- Jul 21, 2012
- Messages
- 5,308
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
Not sure if model year makes all that much difference, but this topic came up recently and gave us some numbers to start with. (Maybe you found it already ..)
https://www.tractorbynet.com/forums/terramite/395960-2005-t5c-tie-rod-ends.html
https://www.tractorbynet.com/forums/terramite/395960-2005-t5c-tie-rod-ends.html
GTM Terre Haute
Member
I called terramite, they gave me Napa's numbers for tie rod ends.
OP
Bradability
New member
For the T5B? Do you know those napa #'s?
Only reason I started this thread was because no one seems to be able to reach Terramite/Terraquip. Not in person or even on the phone. Any the surrounding businesses to them don't seem to have positive feedback about them.
Any help would be greatly appreciated.
Only reason I started this thread was because no one seems to be able to reach Terramite/Terraquip. Not in person or even on the phone. Any the surrounding businesses to them don't seem to have positive feedback about them.
Any help would be greatly appreciated.
GTM Terre Haute
Member
I bought my tie rod ends from Auto Zone. Had to order them. duralast ES323R. I have a T5D I don't remember is both ends are the same. It's only a guess, could the ES323R is for the right and ES323L would be for the left. So check see if your tie rod ends have same threads or one is right and the other left. Good luck.
