Trainer
Silver Member
What would be good to spray on lumber to prevent termites from eating it? I have some 2 X 6's in a building that are close to the ground and I want to reduce the possibility of a termite feeding frenzy.
Termite Treatment
- Thread starter Trainer
- Start date
- Views: 2402
CurlyDave
Elite Member
I have always used Jasco Termin-8 for this. As sold, it has twice the concentration of Copper Napthenate as Coppergreen.
Lately I have seen professional applications of some kind of a Boron compound called Tim-Bor. It is dissolved in water and sprayed on.
When I built my own house, with my own two hands, 20 years ago, I sprayed everything, framing, plywood sheathing, roof deck with the Jasco. Two or three coats everywhere but on the roof deck, where I used six coats on each side. Used 60 gallons on an 1800 sq. ft. house. No termites, and no dry rot, ever.
On the new house, my wife insisted on hiring a contractor, and the best I could get done was the Tim-Bor. They only sprayed the roof deck twice, and with less spray than i would have used, but we will see.
In some states you have to have a license to buy Tim-Bor, others anyone can get it.
Lately I have seen professional applications of some kind of a Boron compound called Tim-Bor. It is dissolved in water and sprayed on.
When I built my own house, with my own two hands, 20 years ago, I sprayed everything, framing, plywood sheathing, roof deck with the Jasco. Two or three coats everywhere but on the roof deck, where I used six coats on each side. Used 60 gallons on an 1800 sq. ft. house. No termites, and no dry rot, ever.
On the new house, my wife insisted on hiring a contractor, and the best I could get done was the Tim-Bor. They only sprayed the roof deck twice, and with less spray than i would have used, but we will see.
In some states you have to have a license to buy Tim-Bor, others anyone can get it.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
You can get oil/emulsion mix permethrin.. it works great. the copper napthenate should work fine too.. that stuff is pretty bad.
I like the permethrin.. it even kills spiders... and them suckers are hard to kill.
soundguy
I like the permethrin.. it even kills spiders... and them suckers are hard to kill.
soundguy
heehaw
Veteran Member
- Joined
- Sep 15, 2000
- Messages
- 2,076
- Location
- russellville, arkansas
- Tractor
- Kubota M4900, B7510 and RTV
you can buy some bifen it off ebay: seems like it is/was used for termites?
heehaw
heehaw
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Demon might also work.. can sometimes get that from local suppliers like DIY places.
soundguy
soundguy
heehaw
Veteran Member
- Joined
- Sep 15, 2000
- Messages
- 2,076
- Location
- russellville, arkansas
- Tractor
- Kubota M4900, B7510 and RTV
just checked, you can buy the tim-bor off ebay too.
heehaw
heehaw
