TC33 and 6ft rotary?
- Thread starter mathey
- Start date
- Views: 3450
Chuck_Lind
Gold Member
- Joined
- Mar 21, 2004
- Messages
- 372
- Location
- Mahaffey, Pa.
- Tractor
- 2000 New Holland TN65 & 1956 John Deere 50
Try checking out LandPride's website; locate rotary cutters. They provide the recommended horsepower for the rotary cutter.
TC33 and 6 ft cutter may be okay; but it depends on what you're cutting. You get into heavy weeds, hay or whatnot and it will bog down the engine.
Just my experience on a TN65 and I have a 6 ft cutter.
TC33 and 6 ft cutter may be okay; but it depends on what you're cutting. You get into heavy weeds, hay or whatnot and it will bog down the engine.
Just my experience on a TN65 and I have a 6 ft cutter.
Chuck_Lind
Gold Member
- Joined
- Mar 21, 2004
- Messages
- 372
- Location
- Mahaffey, Pa.
- Tractor
- 2000 New Holland TN65 & 1956 John Deere 50
Try checking out LandPride's website; locate rotary cutters. They provide the recommended horsepower for the rotary cutter.
TC33 and 6 ft cutter may be okay; but it depends on what you're cutting. You get into heavy weeds, hay or whatnot and it will bog down the engine.
Just my experience on a TN65 and I have a 6 ft cutter.
TC33 and 6 ft cutter may be okay; but it depends on what you're cutting. You get into heavy weeds, hay or whatnot and it will bog down the engine.
Just my experience on a TN65 and I have a 6 ft cutter.
well, the Bush Hog web site said
Recomm. Tractor HP 60" 25 to 40
72" 30 to 45
the TC33 is 33 gross HP and 27 PTO hp...
so I'd say a 72 was marginal at best?
My ground is flat, mostly pasture, and never very tall...Seems like a 6' finish mower wouldn't be as taxing on the TC33.
Recomm. Tractor HP 60" 25 to 40
72" 30 to 45
the TC33 is 33 gross HP and 27 PTO hp...
so I'd say a 72 was marginal at best?
My ground is flat, mostly pasture, and never very tall...Seems like a 6' finish mower wouldn't be as taxing on the TC33.
well, the Bush Hog web site said
Recomm. Tractor HP 60" 25 to 40
72" 30 to 45
the TC33 is 33 gross HP and 27 PTO hp...
so I'd say a 72 was marginal at best?
My ground is flat, mostly pasture, and never very tall...Seems like a 6' finish mower wouldn't be as taxing on the TC33.
Recomm. Tractor HP 60" 25 to 40
72" 30 to 45
the TC33 is 33 gross HP and 27 PTO hp...
so I'd say a 72 was marginal at best?
My ground is flat, mostly pasture, and never very tall...Seems like a 6' finish mower wouldn't be as taxing on the TC33.
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
mathey:
According to printed NH literature the TC33 will pull a 951B 72" Rotary Cutter. I agree with all previous posts as to actual use and power requirements. I would look at what you really have to cut in order to make your actual decision. Good luck on your research and purchase. Jay
According to printed NH literature the TC33 will pull a 951B 72" Rotary Cutter. I agree with all previous posts as to actual use and power requirements. I would look at what you really have to cut in order to make your actual decision. Good luck on your research and purchase. Jay
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
mathey:
According to printed NH literature the TC33 will pull a 951B 72" Rotary Cutter. I agree with all previous posts as to actual use and power requirements. I would look at what you really have to cut in order to make your actual decision. Good luck on your research and purchase. Jay
According to printed NH literature the TC33 will pull a 951B 72" Rotary Cutter. I agree with all previous posts as to actual use and power requirements. I would look at what you really have to cut in order to make your actual decision. Good luck on your research and purchase. Jay
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
That has roughly the same HP as a 1953/1954 ford NAA.. and it was rated for a 6' cutter.. if you get into heavy stuff.. just take a 5' bite.
The guy with the 65 hp tractor and 6' mower can probably cut stands of 2.5" stuff with that much extra hp..
Soundguy
The guy with the 65 hp tractor and 6' mower can probably cut stands of 2.5" stuff with that much extra hp..
Soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
That has roughly the same HP as a 1953/1954 ford NAA.. and it was rated for a 6' cutter.. if you get into heavy stuff.. just take a 5' bite.
The guy with the 65 hp tractor and 6' mower can probably cut stands of 2.5" stuff with that much extra hp..
Soundguy
The guy with the 65 hp tractor and 6' mower can probably cut stands of 2.5" stuff with that much extra hp..
Soundguy
