Hey guys
Today when I went to use the loader it was acting very strange.
The raise/lower function seems to work ok but curl function is messed up.
If I pull the joystick to the left, the bucket seems to curl back normally but when I move the joystick to the right about half way, the bucket will curl forward but there is a screeching sound, like the bypass valve is opening, and there is very litle force pushing the bucket. Also, if I move the joystick all the way to the right, the bucket will curl back rapidly.
If I put the bucket on the ground and try to curl the bucket forward to raise the front wheels off the ground, nothing happens.
I removed the plastic cover that surrounds the loader control valve and nothing looks out of the ordinary on the exterior of the valve.
Any ideas?
Thanks
Today when I went to use the loader it was acting very strange.
The raise/lower function seems to work ok but curl function is messed up.
If I pull the joystick to the left, the bucket seems to curl back normally but when I move the joystick to the right about half way, the bucket will curl forward but there is a screeching sound, like the bypass valve is opening, and there is very litle force pushing the bucket. Also, if I move the joystick all the way to the right, the bucket will curl back rapidly.
If I put the bucket on the ground and try to curl the bucket forward to raise the front wheels off the ground, nothing happens.
I removed the plastic cover that surrounds the loader control valve and nothing looks out of the ordinary on the exterior of the valve.
Any ideas?
Thanks
