Tach guage help

   / Tach guage help #1  

NHbotanut

Gold Member
Joined
May 24, 2007
Messages
259
Location
Central NH
Tractor
Kubota B7610HSD
I have a 2007 B7610. On Sunday, the tach gauge and hour meter stopped working. Any ideas on why? I looked through my shop manual, but could not find any reference to it.

I am hoping it is a loose wire, but don't know where to locate it.
 
   / Tach guage help #2  
The tach on your tractor is most likely cable driven instead of mechanical.
The cable runs from the engine to the back of the guage.
Looks just like the speedometers and cables from older autos.
Odds are the cable has broken and no longer turns the meter.
If you can gain access to the rear of the guage and disconnect the cable,you could start the engine and see if the cable is turning.
If it isn't turning,you've found your problem.
Good Luck!
 

Tractor & Equipment Auctions

2018 Dodge Journey SUV (A59231)
2018 Dodge Journey...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
500 Gallon Fuel Tank with Pump (A55853)
500 Gallon Fuel...
MARATHON 20KW GENERATOR (A58214)
MARATHON 20KW...
2023 VOLVO ECR25 ELECTRIC EXCAVATOR (A60429)
2023 VOLVO ECR25...
2020 Global R3 Air Street Sweeper (A56857)
2020 Global R3 Air...
 
Top