Tach guage help

   / Tach guage help #1  

NHbotanut

Gold Member
Joined
May 24, 2007
Messages
259
Location
Central NH
Tractor
Kubota B7610HSD
I have a 2007 B7610. On Sunday, the tach gauge and hour meter stopped working. Any ideas on why? I looked through my shop manual, but could not find any reference to it.

I am hoping it is a loose wire, but don't know where to locate it.
 
   / Tach guage help #2  
The tach on your tractor is most likely cable driven instead of mechanical.
The cable runs from the engine to the back of the guage.
Looks just like the speedometers and cables from older autos.
Odds are the cable has broken and no longer turns the meter.
If you can gain access to the rear of the guage and disconnect the cable,you could start the engine and see if the cable is turning.
If it isn't turning,you've found your problem.
Good Luck!
 

Tractor & Equipment Auctions

2019 Dodge Grand Caravan Van (A59231)
2019 Dodge Grand...
2018 CATERPILLAR 323 EXCAVATOR (A60429)
2018 CATERPILLAR...
2018 NEW HOLLAND C232 SKID STEER (A60429)
2018 NEW HOLLAND...
2008 TEXAS BRAGG 20 UTILITY TRAILER (A55745)
2008 TEXAS BRAGG...
Deere 335P (A53317)
Deere 335P (A53317)
2022 CATERPILLAR 330 EXCAVATOR (A60429)
2022 CATERPILLAR...
 
Top