Tach guage help

/ Tach guage help #1  

NHbotanut

Gold Member
Joined
May 24, 2007
Messages
259
Location
Central NH
Tractor
Kubota B7610HSD
I have a 2007 B7610. On Sunday, the tach gauge and hour meter stopped working. Any ideas on why? I looked through my shop manual, but could not find any reference to it.

I am hoping it is a loose wire, but don't know where to locate it.
 
/ Tach guage help #2  
The tach on your tractor is most likely cable driven instead of mechanical.
The cable runs from the engine to the back of the guage.
Looks just like the speedometers and cables from older autos.
Odds are the cable has broken and no longer turns the meter.
If you can gain access to the rear of the guage and disconnect the cable,you could start the engine and see if the cable is turning.
If it isn't turning,you've found your problem.
Good Luck!
 

Marketplace Items

6 Band Wooden Barrel (A61574)
6 Band Wooden...
1991 BMY 6x6 Wrecker (M936A2) (A62613)
1991 BMY 6x6...
LAWSON AERATOR (A63291)
LAWSON AERATOR...
2023 SANY SY225C EXCAVATOR (A63276)
2023 SANY SY225C...
DINGO TREE SPADE (A61572)
DINGO TREE SPADE...
CASE TV380 SKID STEER (A64279)
CASE TV380 SKID...
 
Top