Box Scraper Sundown teeth

   / Sundown teeth #1  

pjames

New member
Joined
Jan 20, 2014
Messages
16
Does anyone know a loa of the teeth for sundown 6' bb? Its 5-6 years old, i bought it without teeth.
 
   / Sundown teeth #2  
For every box blade I have seen the teeth are the same size. Most have notches on the front portion that lock on the frame and secure with a pin from the top. The other type have holes in the middle that pin in from the sides. Look at your BB and see if it has option to put a pin in across the scarifiers and if so buy the ones with holes other wise it is the notched type. They are all the same size and should be available from your local tractor dealer or from Agri-Supply.
 
   / Sundown teeth #3  
Agri-Supply has 16 inch and 18 inch box blade teeth. Measure your box blade from the top of the mounting tube to the bottom of the sidewall and see which will go down far enough past that for you. Remember the top of the tooth will be an inch or two above the top of the mounting tube.

Bruce
 
 

Tractor & Equipment Auctions

2004 JOHN DEERE 5205 TRACTOR (A51406)
2004 JOHN DEERE...
Kioti DK45 Tractor (A50860)
Kioti DK45 Tractor...
2011 KENWORTH T800 SLEEPER (A50854)
2011 KENWORTH T800...
2011 V.E. ENTERPRISES 130 BBL STEEL VACUUM TANK TRAILER (A50854)
2011 V.E...
Toro Zero Turn Mower (A50324)
Toro Zero Turn...
1998 FONTAINE TRAILER CO. 48X96 FLATBED (A50854)
1998 FONTAINE...
 
Top