steering
- Thread starter k wade
- Start date
- Views: 1096
Kernopelli
Veteran Member
- Joined
- Oct 16, 2006
- Messages
- 2,209
- Location
- Carterville, Illinois
- Tractor
- Mitsubishi MTE2000D, Dig It 258 Mini Ex, Deere Z930A ZTR
Valley Power has a parts diagram online that may help you out. Satoh Parts
I have had a similar issue and it was the upper thrust bearing (part #3). There is an upper and lower and it is not uncommon for them to go out. Valley Power ( http://www.satohparts.com/) will have the part. That is not to say that this IS your problem....you'll have to investigate but it is likely the culprit or a similarly easy fix.
I have had a similar issue and it was the upper thrust bearing (part #3). There is an upper and lower and it is not uncommon for them to go out. Valley Power ( http://www.satohparts.com/) will have the part. That is not to say that this IS your problem....you'll have to investigate but it is likely the culprit or a similarly easy fix.
lens12
Veteran Member
- Joined
- Apr 7, 2000
- Messages
- 2,113
- Location
- Dixon, Il
- Tractor
- ford 9700, tw30, massey, jd2030 jd4010, yanmar F60d, ym330d, ym276d,ym226d,ym186d, ym2000, ym155
Your ball/nut assemly tubes seperated. You probably also have a bad lower bearing. . We can supply parts & also rebuild steering boxes
