Starting

   / Starting #1  

bennie

New member
Joined
Mar 25, 2009
Messages
7
I have an LK 3054. When I turn the start for glow plug it heats up but when I turn to start nothing happens. Can anyone give me some advice. Battery is OK, cables terminal are clean. Thanks in advice.
 
   / Starting #2  
Welcome to TBN.
How do you know the battery is OK? Have you done a load test on it? If not, what tells you it is not the problem?Verify good clean solid ground at the frame/chassis, for the negative cable. Also make sure the battery post cable connections are unable to be moved without a wrench- ie. snug- tight. How old is the battery? How many hours on the clock?
Did the symptoms appear suddenly or over time, and now causing a no start condition?

To those more familiar with this model, is there a main fuse, 60 amps or similar? PTO lockouts? Neutral safety switches?. Etc?
TIA,

CM
 

Tractor & Equipment Auctions

2006 Volvo VNL (A52748)
2006 Volvo VNL...
HYDRAULIC SKID (A52472)
HYDRAULIC SKID...
2016 Kubota SSV75 Skidloader (RIDE AND DRIVE) (A50774)
2016 Kubota SSV75...
Crosley 10ft Hydraulic T/A Dump Trailer (A50323)
Crosley 10ft...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
John Deere 1020 Tractor (RUNS) (A50774)
John Deere 1020...
 
Top