dadohead
Gold Member
Before retirement I was an engineer on this product. The Select Series premium spec'd decks have 20mm spindles with open bearings (NTN probably) with separate seals. Greasing the spindles DOES reach the bearings. The spindles are certainly rebuildable.
Don't confuse this with the 100 Series mass channel product (Greeneville TN) with 17mm spindles and sealed bearings. Greasing those spindles doesn't directly reach the bearings but fills the spindle cavity. This does help seal the cavity from condensation and pressure washers though.
Don't confuse this with the 100 Series mass channel product (Greeneville TN) with 17mm spindles and sealed bearings. Greasing those spindles doesn't directly reach the bearings but fills the spindle cavity. This does help seal the cavity from condensation and pressure washers though.