Spare 15 fuse in #1 slot on Bobcat CT 235 fuse pannel

[powerscol]

Has anyone used this fuse and is the wiring there. Picture is on PM-34. Just wondering before I try and pull the block to find out. I'm looking for a 15 amp hot with switch on. Also there is a pigtail at the rear that my work light plugs into. Anyone know what fuse it uses. If not Ill pull the fuses one by one to find out. I am a bumble finger guy and hope not to screw up the wiring.

Thanks

 

[winston1]

I am slow, where or what is PM-34? I have a manual showing fuses and what they control but don't know which fuse you are referring too.

 

[powerscol]

PM 43 is the page in the owners manual. Its the first fuse at the top of the fuse block to the right and under the throttle behind the break and cruse handles. #1 15 AMP is listed as a spare in the block.

 

[winston1]

I don't have a copy of the owners manual. My testing with volt meter shows no power going into that top fuse location. No wires going in or out of the fuse rear. I have installed a rear work light on my tractor I think using the pigtail you are referring too. It uses the second fuse down, working lights and brake lights.

 

[powerscol]

Thank you sir. Was a bit under the weather today, so this is a big help

 

[Lockport]

I used that fuse for lights on the snowblower and I just jumpered a hot wire from the headlights to that fuse and ran it through a waterproof toggle to the snowblower.

 

[powerscol]

Lockport
I can not thank you enough. :thumbsup::cool2: Today I did as you suggested and made the spare circuit live. Tomorrow I will post pictures of what I did so folks know.
Thanks again - Keith