Spare 15 fuse in #1 slot on Bobcat CT 235 fuse pannel

powerscol · Oct 26, 2017

Has anyone used this fuse and is the wiring there. Picture is on PM-34. Just wondering before I try and pull the block to find out. I'm looking for a 15 amp hot with switch on. Also there is a pigtail at the rear that my work light plugs into. Anyone know what fuse it uses. If not Ill pull the fuses one by one to find out. I am a bumble finger guy and hope not to screw up the wiring.

Thanks

winston1 · Oct 26, 2017

I am slow, where or what is PM-34? I have a manual showing fuses and what they control but don't know which fuse you are referring too.

powerscol · Oct 26, 2017

PM 43 is the page in the owners manual. Its the first fuse at the top of the fuse block to the right and under the throttle behind the break and cruse handles. #1 15 AMP is listed as a spare in the block.

winston1 · Oct 27, 2017

I don't have a copy of the owners manual. My testing with volt meter shows no power going into that top fuse location. No wires going in or out of the fuse rear. I have installed a rear work light on my tractor I think using the pigtail you are referring too. It uses the second fuse down, working lights and brake lights.

powerscol · Oct 27, 2017

Thank you sir. Was a bit under the weather today, so this is a big help

Lockport · Nov 5, 2017

I used that fuse for lights on the snowblower and I just jumpered a hot wire from the headlights to that fuse and ran it through a waterproof toggle to the snowblower.

powerscol · Nov 6, 2017

Lockport
I can not thank you enough.

:thumbsup::cool2: Today I did as you suggested and made the spare circuit live. Tomorrow I will post pictures of what I did so folks know.
Thanks again - Keith