Sourcing Early Toolcat Wheels and Tires

   / Sourcing Early Toolcat Wheels and Tires #11  
Even a LT235x70-15 truck tire with a load rating of D would work and would be about 28" tall.
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#12  
backspacing looks to be about 4.5"
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#13  
Purchased wheels with 4" backspacing from the link someone posted on the other page

Will 235/75R15 fit a series C toolcat? Is load range C too low?
 
Last edited:
   / Sourcing Early Toolcat Wheels and Tires #14  
You should be able to check tire clearance at the extreams with the info you have. That tire is a 29" dia so I would think it would fit with that rim. If it were me, I would try to get a D load range tire as I run over the occasional stump/rock. If I was crawling over that stuff daily, go with a E rated tire.

https://www.tirerack.com/tires/tiretech/techpage.jsp?techid=55
 
   / Sourcing Early Toolcat Wheels and Tires #15  
I have been lurking on this topic for quite a while. opinions are like A**holes, everyone has one. I have settled on BKT LG306 tires. at about $125 each, not that bad on the pocket. they are turf tires and I think will sute the cat well, at least for my purpose. the current lug tires flat out suck for snow that is for sure. I have to pull the trigger soon as snow is coming to get us here on the east coast. I am interested in the new wheel info provided above. if anyone buys them would sure like a report as to how they work for you. thanks
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#16  
Wheels came in today, I plan on mounting one up soon to verify fitment before I get tires
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#18  
Wheels bolt right on without issue, they are 15x8 with 4 backspacing, 6x6 pattern with 4.63 centerbore. Oem wheels appear to be 4.5 - 4.625 backspacing but extra outboard spacing doesn't look like itll cause clearance issues. I ordered another set of 27x10.50-15 R4 load range D tires for $375 shipped from simpletire. The wheels were just under $300 shipped so I'll be into them for around $700 total. If I have winter traction issues I'll get a set of chains
 
Last edited:
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#19  
Here are pictures of one wheel mounted on the front:

image1[1].jpeg

image4[1].jpeg

image3[1].jpeg

image2[1].jpeg
 
   / Sourcing Early Toolcat Wheels and Tires #20  
Pictures didn't upload.

Are you using a phone or computer?
 

Tractor & Equipment Auctions

2017 Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
2017 Bad Boy...
2016 FORD TRANSIT 250 VAN (A51406)
2016 FORD TRANSIT...
BUYERS PREMIUM & PAYMENT TERMS (A51219)
BUYERS PREMIUM &...
Zero Turn Mower (A48082)
Zero Turn Mower...
2003 DITCH WITCH 3700 RIDE ON TRENCHER (A51242)
2003 DITCH WITCH...
1993 Mono Dump Trailer (A50514)
1993 Mono Dump...
 
Top