Sourcing Early Toolcat Wheels and Tires

   / Sourcing Early Toolcat Wheels and Tires #11  
Even a LT235x70-15 truck tire with a load rating of D would work and would be about 28" tall.
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#12  
backspacing looks to be about 4.5"
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#13  
Purchased wheels with 4" backspacing from the link someone posted on the other page

Will 235/75R15 fit a series C toolcat? Is load range C too low?
 
Last edited:
   / Sourcing Early Toolcat Wheels and Tires #14  
You should be able to check tire clearance at the extreams with the info you have. That tire is a 29" dia so I would think it would fit with that rim. If it were me, I would try to get a D load range tire as I run over the occasional stump/rock. If I was crawling over that stuff daily, go with a E rated tire.

https://www.tirerack.com/tires/tiretech/techpage.jsp?techid=55
 
   / Sourcing Early Toolcat Wheels and Tires #15  
I have been lurking on this topic for quite a while. opinions are like A**holes, everyone has one. I have settled on BKT LG306 tires. at about $125 each, not that bad on the pocket. they are turf tires and I think will sute the cat well, at least for my purpose. the current lug tires flat out suck for snow that is for sure. I have to pull the trigger soon as snow is coming to get us here on the east coast. I am interested in the new wheel info provided above. if anyone buys them would sure like a report as to how they work for you. thanks
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#16  
Wheels came in today, I plan on mounting one up soon to verify fitment before I get tires
 
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#18  
Wheels bolt right on without issue, they are 15x8 with 4 backspacing, 6x6 pattern with 4.63 centerbore. Oem wheels appear to be 4.5 - 4.625 backspacing but extra outboard spacing doesn't look like itll cause clearance issues. I ordered another set of 27x10.50-15 R4 load range D tires for $375 shipped from simpletire. The wheels were just under $300 shipped so I'll be into them for around $700 total. If I have winter traction issues I'll get a set of chains
 
Last edited:
   / Sourcing Early Toolcat Wheels and Tires
  • Thread Starter
#19  
Here are pictures of one wheel mounted on the front:

image1[1].jpeg

image4[1].jpeg

image3[1].jpeg

image2[1].jpeg
 
   / Sourcing Early Toolcat Wheels and Tires #20  
Pictures didn't upload.

Are you using a phone or computer?
 

Tractor & Equipment Auctions

2016 Chevrolet Tahoe SUV (A54815)
2016 Chevrolet...
New Wolverine 3Pt hitch Receiver (A59000)
New Wolverine 3Pt...
2021 International HV507 4x4 12ft Single Axle Dump Truck (A55852)
2021 International...
2013 John Deere 650K Crawler Tractor Dozer (A56857)
2013 John Deere...
2021 Kubota SVL75-2 Track Loader (A56435)
2021 Kubota...
2012 International 4300 Reefer Truck (A56435)
2012 International...
 
Top