Source For New Locking Pins On Pallet Forks

[donm1]

I was given a pair of 42" pallet forks rated @ 1,500 Lb each. The locking pins are missing from the forks. I just started work on the steel frame for my LA844 loader and would like to use the notch adjustment setup. Does anyone know of a source for new spring loaded pins?

Thanks in advance.

Don M.

 

[WilcoKubota]

You mean this?
Arretering 15,8mm pen - AR1A - KRAMP

I think you can't order it from the US...

 

[donm1]

Yes, that is very similar to pin I am looking for. I actually have 1 of the pins (minus the lift handle) and was hoping to find one with approximately the same dimensions. The one I have is fairly chewed-up so I may not be able to measure it exactly. I've tried searching for one on the web without luck so I probably just don't know the proper name for the part. Thanks for the quick response.

 

[Zebrafive]

Go to a local fork truck repair shop. They should have what you need.

 

[lostcause]

i asked a similar question a couple years ago and someone posted a link that had many styles. see if yours is there:

Fork Pin Kits

 

[donm1]

Thanks for the link Lostcause. That site has a Pit Kit that will fit my forks.