snowplow on my NH TN65

[tractorman71]

built out of stuff I had around the shop, parts from fisher,western snowplows,hyd. cylinder from an old IH corn planter. and some spare time.

 

[tractorman71]

dang, no pic. I'll try again

 

[tractorman71]

hopefully you will see a pic here.................

 

[ronjhall]

Your pictures need to less than 100k.
Make them about 92k to make sure.

 

[tractorman71]

how bout now...

 

[tractorman71]

lets see if this resizer bidness works

 

[tractorman71]

another pic

 

[PineRidge]

Nice setup. I've seen lots of plows that attach to the loader arms via QA but never one that used an electric hydraulic pump to lift the blade. Is it a lot of work to mount/dismount from the tractor?

On a second look maybe that's not an electric cylinder at all.

 

[tractorman71]

electric my butt!!! it is plumbed into the loader valve. up/down left/right are done with the loader joystick

 

[tractorman71]

the blade is a fisher, it comes off with 2 spring loaded pins and 2 hyd. couplers. I made the plow frame compact enough so I can put the loader on without removing the plowframe. blade comes off in 15 seconds, plow frame comes off in 5 mins.