Skidsteer/2pt quick hitch

[1gr8bldr]

I have a bobtach frame just like this;
BOB-TACH FRAMES lwtm

I want to bolt a quick hitch just like this to it [or weld, but will wait until I know it works well, and may incorporate a horizontal angle adjuster]
john deer quick attachment (hitch)

in order to use or move my 3 pt equipment. Any thoughts or ideas?

 

[1gr8bldr]

LOL, title should have read skidsteer to 3pt I was looking at this. I should be able to fabricate some big hooks and create my own using my bobtach only???

 

[1gr8bldr]

I always use my quick hitch on my tractor. Works great except I no longer use the top hook. I made an adapter and pin for this. Much easier than fabricating all my implements to fit the hook

 

[countrybumpkin]

Here is the one I built. Really comes in handy.

http://www.tractorbynet.com/forums/build-yourself/180572-another-ssqa-three-point-adapter.html

 

[Fallon]

I have a spare QH & several SSQA plates. Planning on welding them together just like this myself.

 

[Xfaxman]

Re: Skidsteer/THREE point hitch adapter

I bought an adapter, not quick, but very handy! :thumbsup:

It has extra rollback built in.

 

[Fallon]

I'm also hoping to create an adapter to put a SSQA on my 3pt. So I can throw my pallet forks on the 3pt & take advantage of the superior lift capacity & what not. Biggest problem is the adapter is 4 figures or more than the cost of the forks for just the male SSQA part. Maybe I'll come across something cheap or scrap at some point.

 

[Xfaxman]

I'm also hoping to create an adapter to put a SSQA on my 3pt. So I can throw my pallet forks on the 3pt & take advantage of the superior lift capacity & what not. Biggest problem is the adapter is 4 figures or more than the cost of the forks for just the male SSQA part. Maybe I'll come across something cheap or scrap at some point.

You are talking about the other end of the tractor from what the original poster wants for the Front End Loader.

3 point Quick Hitch on FEL


This is what you are talking about on the 3 point

Change your 3 point hitch to universal quick attach

 

[Fallon]

You are talking about the other end of the tractor from what the original poster wants for the Front End Loader.

I was talking about a 3pt on my loader in my first post & SSQA on my 3pt in my 2nd. Hence the also.

Its well under half the price to put a 3pt on the loader as it is to put a SSQA on the 3pt, no matter if you buy or make your own from parts.