LBrown59
Super Star Member
- Joined
- Oct 27, 2004
- Messages
- 16,831
- Tractor
- 2003 Kubota BX1500/2004 Kubota Bx23/2005 Kubota BX1500
so did i.Bird said:
Siphoning fuel.
- Thread starter AchingBack
- Start date
- Views: 4987
YM-135trac
Bronze Member
- Joined
- Apr 24, 2008
- Messages
- 83
If you seal around the hose in tank w/rag or something&blow(not suck) the tank will presurize and start a siphon in quick order I have found. unless your tank has a vent of some sort that won't allow pressurize?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I'm sure most of us do.. or at least many of us.
soundguy
soundguy
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,014
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Not me... nope... never...
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,014
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Rara Avis
Veteran Member
I'm smart...I always convinced someone else to do the job...
sandman2234
Super Member
- Joined
- Dec 4, 2005
- Messages
- 6,031
- Location
- Jacksonville, Florida
- Tractor
- JD2555 and a few Allis Chalmers and now one Kubota
My old Chevy has a gas lid big enough to drop a dipper into it and just scoop it out. It is usually the one that needs the gas, though.
David from jax
David from jax
MikeD74T
Veteran Member
Every year I siphon excess gas from my snowmobiles, lawnmowers, & 4 wheelers before retiring them for the season. I siphon by mouth but use transparent tubing & can see the gas before it reaches the end of the tube. It ain't rocket science. MikeD74T
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,014
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
MikeD74T said:
I wonder if modern fuel has additives to prevent the kinds of things that we have all heard about regarding gas turning to laquer, etc... I used to use Stabil in things that were going to get stored, but haven't in a long time and have seen no problems.
I have a 1985 Sears Craftsman with a BS 3.5HP that I have never drained the gas from, nor changed the oil. 22 years. It still starts on the first pull. Chain saws, weed eaters, snow blowers, lawn tractors never get the gas drained over winter, either. I also have a 1985 Chevy pickup that has sat next to the garage for at least four years with gas in it that fired right up a couple weeks ago with a good battery. Four year old gas in a carb and it didn't make a difference.