Shifting problems

[Jamassey]

I just replaced the clutch, pressure plate, TOB on my mte2000d. All worked great for about 5hrs, now it's hard to shift with the Rpms high, have to throttle it down so it won't grind. Is this just break in or do I have issues. Have not adjusted yet.

 

[skylarkguy]

Check the pedal adjustment. I had similar problem when I changed my clutch. Putting the pedal pre-load into spec fixed the problem.

 

[Jamassey]

Check the pedal adjustment. I had similar problem when I changed my clutch. Putting the pedal pre-load into spec fixed the problem.

I've adjusted in and out and still have the problem, any other suggestions would be great.

 

[Jamassey]

Tried again adjusting from one end to the other and it worked this time. Thanks skylarkguy

 

[skylarkguy]

:thumbsup: