RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Shibaura D28F (tire loading)
- Thread starter Dewey_Williams
- Start date
- Views: 3849
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Rowski
Veteran Member
- Joined
- May 18, 2000
- Messages
- 1,474
- Location
- North Central Vermont, Jay Peak Area
- Tractor
- 2004 New Holland TN70DA with 32LC loader, 2000 New Holland 2120 with Curtis cab, 7309 loader
Sure can!
I unloaded about 140 gallons of calcium chloride and loaded 90 gallons of rim guard with a small drill pump. Its not the fastest way but got the job done.
You can see some pictures of my setup in this thread. Pictures are near the end.
I unloaded about 140 gallons of calcium chloride and loaded 90 gallons of rim guard with a small drill pump. Its not the fastest way but got the job done.
You can see some pictures of my setup in this thread. Pictures are near the end.
OP
Dewey_Williams
Member
My tractor is 4x4.Do I load front and back or just back?
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Just the back tires.
Although, there are folks on TBN who have loaded their fronts too.
Me...just the rears... mine is a 4WD too, BTW
Although, there are folks on TBN who have loaded their fronts too.
Me...just the rears... mine is a 4WD too, BTW
buppy69
Platinum Member
I even load the fronts on a 2WD.
Eugene
Eugene
