Seat switch disable?

   / Seat switch disable?
  • Thread Starter
#11  
Yeah- safety is important, but we all survived before all these measures were implemented. I'll figure the seat thing out without the (lack of) help from others.
Please scan your media outlets for stories of me being assaulted by my seat safety switch disabled Cub Cadet.
Vince D
 
   / Seat switch disable? #12  
Here's how to place the switch in a temporary maintenance mode so you can do the deck wash and then return it to full safety afterwards.
SeatSwitch.jpg
 
   / Seat switch disable? #13  
Yeah- safety is important, but we all survived before all these measures were implemented. I'll figure the seat thing out without the (lack of) help from others.
Please scan your media outlets for stories of me being assaulted by my seat safety switch disabled Cub Cadet.
Vince D

This! :D
 
   / Seat switch disable? #14  
If you ain't bright enough to set the parking brake, you probably need all the safety switches you can get.
 
   / Seat switch disable? #15  
For a GT2500 series you just unplug the switch under the seat. Allows you to get up and check the gas and pick up sticks ect. As well as wash the deck as you wanted.
 
   / Seat switch disable? #16  
I bought an aftermarket seat so I camped the button down with wire ties. Has held for 4 years
 
   / Seat switch disable? #17  
If you ain't bright enough to set the parking brake, you probably need all the safety switches you can get.

Or you just don't like the extra work of setting it. I partially disabled the switch on a LT1050. It had 2 wires that it used. One was to shut the engine off if you got off without putting the brake on. The other shut the deck off if you got off with the deck on. I disabled the engine shutdown switch and left the deck shutdown switch enabled as I would prefer not to lose my foot if I were to fall off.

Aaron Z
 
   / Seat switch disable? #18  
Or you just don't like the extra work of setting it. I partially disabled the switch on a LT1050. It had 2 wires that it used. One was to shut the engine off if you got off without putting the brake on. The other shut the deck off if you got off with the deck on. I disabled the engine shutdown switch and left the deck shutdown switch enabled as I would prefer not to lose my foot if I were to fall off.

Aaron Z

:thumbsup::laughing:
 

Tractor & Equipment Auctions

UNUSED FUTURE SKID STEER MOUNTING PLATE (A51244)
UNUSED FUTURE SKID...
2020 Case TR310B Skidloader (RIDE AND DRIVE) (A50774)
2020 Case TR310B...
UNUSED CFG Industrial MH12RX Mini Excavator (A47384)
UNUSED CFG...
2002 International 9200i Truck (A52128)
2002 International...
2011 Chevrolet Malibu Sedan (A50324)
2011 Chevrolet...
2024 AGT INDUSTRIAL HR-230 3-WHEEL LOADER (A51243)
2024 AGT...
 
Top