rtv snow plow

   / rtv snow plow #1  

gates

Silver Member
Joined
Feb 15, 2005
Messages
160
Location
Maryland
Tractor
JD 6410 Cab MFWD & FEL,JD 4610 MFWD & FEL,JD 4720 Cab MFWD & 400CX FEL ,Kub. RTV 900W,Hon. Rincon w/plow,Yam. Grizzly,Case 1845C,580L,580SE,Terex 636,Grasshopper 428D,Takeuchi TL 150,Brush Bandit 150
Can a front winch be used to raise and lower the plow? If so rather then buying a power unit for the blade, buy a winch. At least you can use the winch for other options.
 
   / rtv snow plow #2  
It probably could but it would be realllll slow..

Frank
 
   / rtv snow plow #3  
Which RTV do you have? If it is the Worksite or Turf model you already have hydraulics and can lift it by adding some steel and a cylinder. I agree, a winch is too slow!!!

Lorn.
 
   / rtv snow plow
  • Thread Starter
#4  
I have the worksite. I was just attempting the old, kill two birds with one stone. The blade on my four wheeler works with the winch. This is where the idea came from.
 
   / rtv snow plow #5  
gates,

Welcome to the forum.

Check out www.hunterworks.com

I think he has a setup for raising the plow with the winch.
 
   / rtv snow plow #6  
My personal opinion would be use the winch. The electric/hydro factory lift is not very speedy.If you are not looking for speed use the winch.
 

Tractor & Equipment Auctions

2016 E-Z Beever M12R Towable Brush Chipper (A51691)
2016 E-Z Beever...
2014 Ford F-550 Altec AT37G 37ft Bucket Truck (A50323)
2014 Ford F-550...
2019 Ford F-350 XL (A50120)
2019 Ford F-350 XL...
Deutz BF12L413F 19.1L V12 Turbo Diesel Generator (A51691)
Deutz BF12L413F...
46006 (A51694)
46006 (A51694)
Pallet of Gate Valves (A50121)
Pallet of Gate...
 
Top