painttruck
New member
has anybody tried using a winch for a three point hitch for lifting the implement.my case tractor does not have a 3 point set up and I don't know to find the item needed to change mine over. I have a case210b tractor
rototiller
- Thread starter painttruck
- Start date
- Views: 1000
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,787
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Conversion kits to change Pre-Ferguson 3-Pt Hitch tractors TO a Ferguson Industry Standard 3-Pt Hitch are still available:
LINK: Complete Cat 1 3 point hitch
Improve your titles. Something about PRIMARY INTEREST Three Point Hitch, rather than SECONDARY INTEREST rototiller, would be more productive.
DESIGNED AND MANUFACTURED IN THE USA BY
REDLANDHILL.
THIS IS A UNIVERSAL 3 POINT HITCH SYSTEM IN CAT 1 SIZING.
THIS IS COMPATIBLE WITH ANY CAT 1 3 POINT HITCH IMPLEMENT. IF YOU HAVE AN OLDER
TRACTOR THAT DID NOT COME WITH A FACTORY 3 POINT SYSTEM THIS IS WHAT YOU
NEED TO PUT IT TO WORK USING ANY OF THE DOZENS OF CAT 1 3 POINT IMPLEMENTS THAT CAN
BE FOUND EVERYWHERE.
REDLANDHILL.
THIS IS A UNIVERSAL 3 POINT HITCH SYSTEM IN CAT 1 SIZING.
THIS IS COMPATIBLE WITH ANY CAT 1 3 POINT HITCH IMPLEMENT. IF YOU HAVE AN OLDER
TRACTOR THAT DID NOT COME WITH A FACTORY 3 POINT SYSTEM THIS IS WHAT YOU
NEED TO PUT IT TO WORK USING ANY OF THE DOZENS OF CAT 1 3 POINT IMPLEMENTS THAT CAN
BE FOUND EVERYWHERE.
LINK: Complete Cat 1 3 point hitch
Improve your titles. Something about PRIMARY INTEREST Three Point Hitch, rather than SECONDARY INTEREST rototiller, would be more productive.
Last edited:
