Rocker Switch

[HarleyRiders97]

I'm looking for a rocker switch for a McCormick/ Farmall CT41 tractor. The switch is for the lights. It has a red triangle on the switch. The back of the switch has three spots for the wires ( plugs) to be pushed into. Top and bottom are the same size, the middle one is smaller. The numbers have been worn off....any help would be appreciated.

Attachments

• 
  IMG_4121.JPG

  3.8 MB · Views: 104

 

[Roadworthy]

If you can get a schematic that would help. My guess is that one of the wires is hot when you turn on the key. The other two may be to select high or low beam. Good luck.

 

[HarleyRiders97]

Thank you

 

[TractorTech]

Can you provide a picture front snd back? Sounds like an SMV switch.

 

[HarleyRiders97]

Can you provide a picture front snd back? Sounds like an SMV switch.

 

[D&D]

I'm looking for a rocker switch for a McCormick/ Farmall CT41 tractor. The switch is for the lights. It has a red triangle on the switch. The back of the switch has three spots for the wires ( plugs) to be pushed into. Top and bottom are the same size, the middle one is smaller. The numbers have been worn off....any help would be appreciated.

Attachments

• 
  IMG_4121.JPG

  3.8 MB · Views: 104

Looks like the part #

245908C1​

Pretty pricey at Amazon

Amazon.com: RAParts 245908C1 New Hazard Switch Fits Case-IH Tractor Models CX50 CX60 CX70 + : Patio, Lawn & Garden

Buy RAParts 245908C1 New Hazard Switch Fits Case-IH Tractor Models CX50 CX60 CX70 +: Spare & Replacement Parts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

Hazard Switch fits Case IH CX50 CX60 CX70 CX80 CX90 CX100 MX80C MX90C MX100 MX100C MX110 MX120 MX135 MX150 MX170 245908C1 3221208R1 fits McCormick

Hazard Switch for Case IH Tractor(s) C50, C60, C70, C80, C90, C100, CX50, CX60, CX70, CX80, CX90, CX100, MX80C, MX90C, MX100, MX100C, MX110, MX120, MX135. Replaces Case IH OEM Number(s) 245908C1, 194114A1, 2018101042, 3221208R2, 07070293, 3221208R1.

www.tractorpartsasap.com

 

[HarleyRiders97]

Looks like the part #

245908C1​

Pretty pricey at Amazon

Amazon.com: RAParts 245908C1 New Hazard Switch Fits Case-IH Tractor Models CX50 CX60 CX70 + : Patio, Lawn & Garden

Buy RAParts 245908C1 New Hazard Switch Fits Case-IH Tractor Models CX50 CX60 CX70 +: Spare & Replacement Parts - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

Hazard Switch fits Case IH CX50 CX60 CX70 CX80 CX90 CX100 MX80C MX90C MX100 MX100C MX110 MX120 MX135 MX150 MX170 245908C1 3221208R1 fits McCormick

Hazard Switch for Case IH Tractor(s) C50, C60, C70, C80, C90, C100, CX50, CX60, CX70, CX80, CX90, CX100, MX80C, MX90C, MX100, MX100C, MX110, MX120, MX135. Replaces Case IH OEM Number(s) 245908C1, 194114A1, 2018101042, 3221208R2, 07070293, 3221208R1.

www.tractorpartsasap.com

The back of the switch picture you sent me is not correct, but thanks for replying

 

[HarleyRiders97]

The back of the switch picture you sent me is not correct, but thanks for replying

Three separate plugs go into the back openings

 

[ptsg]

This tractor was made by LS. Not sure exactly what model yet but may or may not help with the search.

EDIT: This is possible the correct part number: 40250731 and from Amazon: Amazon.com

No really good pictures of the switch, so it's hard to be sure.

 

[TractorTech]

You might try:

https://www.rosstractor.com/new-models/mccormick-1122

OR
McCormick Tractors :: Cherry Ridge Sales and Service

 

[TractorTech]

I think @ptsg got it. After doing some more research, I found this on an LS41-47 on an Australian tractor dealer site:

https://www.mircoagequipment.com.au/wp-content/uploads/1970/01/LS-N41-N-47-Parts-Manual-Part-1.pdf

https://www.mircoagequipment.com.au/wp-content/uploads/1970/01/LS-N41-N-47-Parts-Manual-Part-2.pdf

Part 2, page 3, item 5 shows the part number @ptsg referenced

 

[D&D]

The back of the switch picture you sent me is not correct, but thanks for replying

That’s what’s in their parts book. Oh well

 

[Chanceywd]

If you can get a schematic that would help. My guess is that one of the wires is hot when you turn on the key. The other two may be to select high or low beam. Good luck.

I would wonder if it is just a single pole single throw with the smaller one a ground for the led.

I put a similar one on my wiper circuit on my 2006 silverado so I can shut them off when up and raise them up so they don't freeze in the winter. Some smart engineer made the wipers so you can't raise them in park or shut off up. The fix is finding the arms from another year at the junk yard, I forget which year.
I Read it online in some forum.

Bill