REVERSE ROTATION MULCHER
- Thread starter Eagleview
- Start date
- Views: 10452
Treemow
New member
The ones I have the shaft protrudes from the right side where the sheaves mount. No motor mounts on the left.
tonyoz
Platinum Member
Yes the bearing housings are identical .
Last night I emailed FAE and got a very quick response , quite impressed I was .
The engineers said there were several ways of doing it but they asked if it was worth the trouble . Well it will only take maybe 5 hours and I'm sure it will be better for my type of work .
Last night I emailed FAE and got a very quick response , quite impressed I was .
The engineers said there were several ways of doing it but they asked if it was worth the trouble . Well it will only take maybe 5 hours and I'm sure it will be better for my type of work .
tonyoz
Platinum Member
A word of caution,before taking the stub axles off the rotor mark there location so that when reassembling they go back in the same place otherwise you may get a runnout problem.:thumbsup:
Treemow
New member
Sorry I was speaking of the ssl line of mulchers for skid steers.
Just to show what we are up against over here , every step on the ladder you take , someone is there to knock you back down .
I bought this ROPS frame for my excavator on ebay in New Zealand for $2000 . Shipping was around $1100 and then customs duty etc on top . It wasn't much cheaper than new but it was going to be a few weeks quicker to go this way . ACFS is a holding yard company in Brisbane that stores goods while they are going through customs . Have a look at the bill they have sent me for storage ! Mafia are gentlemen compared to these crooks . I hope they have a use for it .
I bought this ROPS frame for my excavator on ebay in New Zealand for $2000 . Shipping was around $1100 and then customs duty etc on top . It wasn't much cheaper than new but it was going to be a few weeks quicker to go this way . ACFS is a holding yard company in Brisbane that stores goods while they are going through customs . Have a look at the bill they have sent me for storage ! Mafia are gentlemen compared to these crooks . I hope they have a use for it .
tonyoz
Platinum Member
WTF There must be a decimal point missing.You could have got 1 built for less than the storage.
They were demanding $23,000 but big heartedly they were going to accept 50% of this . I told them to keep it once again . They came back today and said they would accept $3,000 , I said keep it or accept $500 . I knew they would come back at $1,000 to show me they were still the dominant ones which they did late today . I will pick it up tomorrow . It's like bartering for beads with the natives with these guys . 
Here are some similar links:
