Replacement backhoe teeth?

[ning]

Has anyone found a non-dealer source for the branson backhoe bucket teeth?
I got overly aggressive a while back and busted a couple teeth and while I'm ok for the moment I'd like to have some extras on hand.

(searched threads:

Bolt on back hoe teeth

Does anyone know where I can get sharper teeth for my backhoe? They are bolt on style. I have been trying to find something like the Tiger Teeth, but I am drawing a blank on the style that will fit my bucket. It's a standard Branson bucket. Nothing fancy. My soil is either sandstone or...

www.tractorbynet.com

Ansung backhoe and Branson tractor

Anyone have success finding replacement teeth for Ansung bh? Not very happy with Branson 4720H and backhoe. Purchased new, as package deal. Bh: shipped with wrong stabilizers, subframe split, grease fittings frozen, poor factory welds failed. Poor to no customer support. Tractor: probs with...

www.tractorbynet.com

)

 

[mndave]

I replaced mine with these. Had to order 2 sets but that gives me a couple extra on hand.

https://www.palletforks.com/tractors/3-point/backhoes-and-accessories/backhoe-bucket-3-piece-replacement-tooth-kit/122918.html

 

[mndave]

I happened to see these in the shed so I took some comparison pics.

The Titan tooth is on the left, Branson on the right.

 

[TractorTech]

I saw the Titan teeth online, but with no dimensions to compare. Looks close enough or modify the bucket to make work

 

[ning]

$85/3 = $28.33 each, + tax, no shipping; still seems pricey.

I can't recall how much I paid for replacements at Dave's, + tax & shipping, but it may've been about that.

From the comparison pics it looks like there's more metal thickness on the OEM tooth brackets and the nuts are slightly recessed, though the titan ones are pointier (which would definitely help in hard clay) but who knows how the metal itself compares.

 

[TractorTech]

What are the letters on the top of your tooth, OMT?

 

[TractorTech]

Are these the same as your Titan teeth?

https://www.palletforks.com/skid-steers/bucket-and-accessories/bucket-teeth-cat-305cr-304.5-304cr-unitooth-digging-w-bolt-nut-retainer-1358203/125120.html?gclid=CjwKCAjw-vmkBhBMEiwAlrMeF5jlYV36-mRXXaKEV89ab7HRDGoCqPX_VFg3zaZN97OxABBE3U3MrBoCBGIQAvD_BwE

 

[ning]

Are these the same as your Titan teeth?

https://www.palletforks.com/skid-steers/bucket-and-accessories/bucket-teeth-cat-305cr-304.5-304cr-unitooth-digging-w-bolt-nut-retainer-1358203/125120.html?gclid=CjwKCAjw-vmkBhBMEiwAlrMeF5jlYV36-mRXXaKEV89ab7HRDGoCqPX_VFg3zaZN97OxABBE3U3MrBoCBGIQAvD_BwE

The branson & titan teeth shown are about 2" center-to-center bolt holes; this link is for 3", much larger

 

[TractorTech]

Drill/torch another hole and get teeth that are more available

 

[mndave]

What are the letters on the top of your tooth, OMT?