Removing clutch from engine shaft.

[clytle374]

Removing clutch from engine shaft.(modern BCS)

I'm swapping engines on an 852 from diesel to gas. Had a spare clutch so I didn't have to remove it for the swap, but the flange(bell housing) doesn't come off over the clutch. So the clutch has to come either way.

Does the bolt in the end of the crank shaft work as a jack bolt to remove the clutch? Or is it more complicated?
Thanks
Cory

 

[clytle374]

well I put some tension against the bolt and a few taps with a hammer popped it loose. I was also surprised to see Honda tapping holes with bad taps, oh well easy fix.