Rear Remotes (again)

[CaptPat]

I just had Kubota rear remotes installed on my B7800 prior to delivery. The factory set up has 3 hydraulic lines going to the remote valve body--it's a TNT set up. Hope this helps.

 

[BlacknTan]

It does help Pat, and thanks.

I've been doing alot of research, and i see that Kubota does use three hoses..

Can you post pictures of the Kubota setup?

Thanks again!

 

[CaptPat]

It does help Pat, and thanks.

I've been doing alot of research, and i see that Kubota does use three hoses..

Can you post pictures of the Kubota setup?

Thanks again!

I'll try and get some pictures posted this weekend

 

[CaptPat]

Okay, attached is the Kubota Rear Remote set up for my B7800. It has 3 hoses that go the valve block. The other 2 hoses are attached to my tilt cylinder

The push pull switch on the right upper corner of the mounting plate is the switch for the extra lights I attached to the ROPS. It's a waterproof and sealed switch rated for 15A that I found at a marine supply store, it's all metal--no plastic.

Hope this helps.

 

[BlacknTan]

Thanks Capt Pat..

Good looking setup!

 

[jonsstihl]

sorry to drag this post back up but this looks very similar to the setup I have pictures of.

blackntan if you want more pics of the actual plumbing I can post more

captpat do you have any idea who makes your bracket, I really like that setup and would like to get one for my B7800