Rear Remote CK 20H

[Mike O]

Seasons Greetings: I am having issues with the hydraulics on my 2007 Kioti CK20H; the engine starts to bog down when the Remote Control Valve Lever is in either position A or B. I forgot to move the lever back to N after using a rear mounted hydraulic implement; used the tractor for about an hour with the rear hydraulics deadheaded and the PTO engaged. Tractor started to overheat and run rough, but I caught it in time. The tractor runs fine and both the FEL and PTO implement operate ok (not using rear hydraulics) in the N position however I need to engage the B position to power the log splitter. Any ideas? Thanks.

 

[K5lwq]

If you have another implement or cylinder that doesn't have a separate valve I would want to see if it still loads the tractor. Might even use a hose with nothing attached and see if you are even getting flow out of the valve.

It could be something simple like a bad coupler on the tractor or splitter.

Good luck and Merry Christmas!