Rambling on about PHD...
- Thread starter mwemaxxowner
- Start date
- Views: 2402
crazyjake8493
Member
- Joined
- Oct 5, 2020
- Messages
- 42
- Tractor
- Kioti CS2220
I use an old Speeco PHD on my Kioti and it's been a breeze to use. We have hard clay with rocks and I've never buried it. Just set the 3pt lowering speed to fairly slow, dig about 12" and pop it up move the dirt out, then back in for another bite.
I've never found the need for down pressure. With a good spiral tip and cutting edges the auger should take care of it.
I've never found the need for down pressure. With a good spiral tip and cutting edges the auger should take care of it.
OP
mwemaxxowner
Platinum Member
When in clay, y'all are using the fish tail style point?
I believe those are less likely to cause the bit to suck itself down.
I believe those are less likely to cause the bit to suck itself down.
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,571
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
Be aware that some post hole diggers are not designed for a lot of lifting force on the boom pole (I just looked at the specs for one that was only rated for 500# lifting force). When you are lifting the auger back out of the hole, the 500# of down force goes away. 500# of weight hung on the attachment does not.
OP
mwemaxxowner
Platinum Member
That's a good point. Thank you.
