radiator cap part #

[robert421960]

ive got a farmpro 2006 2425
can someone give me a number for a crossover cap so i can buy one at a local parts house?

 

[Affordable]

You can try this one, if it does not work we have the OEM ones

Stant 10228

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[Bob Rooks]

Seriously?
If anyone could it would be Diamondpilot.
I'm going to bet you will get quicker satisfaction by just taking in your cap and have them match it up. It's what they do.

 

[Diamondpilot]

My father was VP of Stant and had over 40 years with them but he retired 2 years ago.

I think the number Tommy gave is a good one. You want a low pressure cap. 7 psi is what I have on mine.

Chris

 

[robert421960]

thanks guys

 

[Keno Tractors]

Hi, we cross with Napa #7031442, we use these radiator caps.

Nan
Parts Dept.

 

[Affordable]

The Napa #7031442 is a 15 PSI cap ,we use the lower pressure one.

Tommy
Affordable Tractor Sales
"Your Jinma Parts Superstore"
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

 

[robert421960]

thanks for the help guys
i got the stant one you gave me the number for

 

[greg_g]

Yeah, the Stant 7 psi cap is a good choice. OE is even lower (3-4 psi), but they're junk. Closest aftermarket cap you'll get is the standard 7 psi agricultural/off-road cap. A 15 psi automotive cap will sooner or later lead to seepage

//greg//

 

[Bob Rooks]

Well, in defense of Keno, y'all know that water (say coolant) boils at a much higher temperature when under pressure (it's called Gay-Lussac’s Law). I have had the 15# Stant cap on my dozer since day one, and run a 190° thermostat for thermal efficiency. I am also over 250 hrs. on the lube oil, and it is perfect.