Rabbit Speed

   / Rabbit Speed #1  

caspers62

New member
Joined
Nov 27, 2010
Messages
4
Tractor
Bobcat TC 5600D/Long 510DT
I have a 08 5600D and the high speed has quit working, everything else is working. Work mode works, when I push the button on the travel selector handle nothing lights up or switches. I have checked the switch itself and it seems to be working. Any ideas???
 
   / Rabbit Speed #2  
You've probably already done this, but you might have some error codes stored. IIRC that little card in the cab has the procedure for accessing the codes. I think you hold down the headlight button...but I don't recall for sure.
 
   / Rabbit Speed
  • Thread Starter
#3  
I'll have to check that. Thanks
 
   / Rabbit Speed
  • Thread Starter
#4  
There are no error codes. It read "none" .Still digging into it.
 
   / Rabbit Speed #5  
Don't know why it would stop working if it was before, but look at the control panel setup (page SA-6 in the operation manual) under two speed set up.
 
   / Rabbit Speed
  • Thread Starter
#6  
That was it, don't know how it got turned off but going into that section and basically rest it to where it should be. The two speed works!! Thanks
 

Tractor & Equipment Auctions

2018 VOLVO VNL TANDEM AXLE SLEEPER (A51222)
2018 VOLVO VNL...
2011 CATERPILLAR M318D MOBILE EXCAVATOR (A51242)
2011 CATERPILLAR...
2016 WITZCO RG-35 RGN LOWBOY TRAILER (A50459)
2016 WITZCO RG-35...
2013 UTILITY VS2DX 53FT DRY VAN TRAILER (A51222)
2013 UTILITY VS2DX...
2017 PETERBILT 587 TANDEM AXLE SLEEPER TRUCK (A51222)
2017 PETERBILT 587...
2016 WESTERN STAR 5700XE TANDEM AXLE SLEEPER (A51219)
2016 WESTERN STAR...
 
Top