Rabbit Speed

   / Rabbit Speed #1  

caspers62

New member
Joined
Nov 27, 2010
Messages
4
Tractor
Bobcat TC 5600D/Long 510DT
I have a 08 5600D and the high speed has quit working, everything else is working. Work mode works, when I push the button on the travel selector handle nothing lights up or switches. I have checked the switch itself and it seems to be working. Any ideas???
 
   / Rabbit Speed #2  
You've probably already done this, but you might have some error codes stored. IIRC that little card in the cab has the procedure for accessing the codes. I think you hold down the headlight button...but I don't recall for sure.
 
   / Rabbit Speed
  • Thread Starter
#3  
I'll have to check that. Thanks
 
   / Rabbit Speed
  • Thread Starter
#4  
There are no error codes. It read "none" .Still digging into it.
 
   / Rabbit Speed #5  
Don't know why it would stop working if it was before, but look at the control panel setup (page SA-6 in the operation manual) under two speed set up.
 
   / Rabbit Speed
  • Thread Starter
#6  
That was it, don't know how it got turned off but going into that section and basically rest it to where it should be. The two speed works!! Thanks
 

Tractor & Equipment Auctions

71053 (A49346)
71053 (A49346)
2025 Safety Basket Forklift Attachment (A50322)
2025 Safety Basket...
WE DO NOT GUARENTEE HOURS UNLESS WE SAY SO!!! (A50775)
WE DO NOT...
2019 CATERPILLAR 308 CR EXCAVATOR (A51242)
2019 CATERPILLAR...
2013 COACHMEN CATALINA TRAVEL TRAILER (A50854)
2013 COACHMEN...
2012 Toro Greensmaster 1600 Walk Behind Mower (A48082)
2012 Toro...
 
Top