Rabbit Speed

   / Rabbit Speed #1  

caspers62

New member
Joined
Nov 27, 2010
Messages
4
Tractor
Bobcat TC 5600D/Long 510DT
I have a 08 5600D and the high speed has quit working, everything else is working. Work mode works, when I push the button on the travel selector handle nothing lights up or switches. I have checked the switch itself and it seems to be working. Any ideas???
 
   / Rabbit Speed #2  
You've probably already done this, but you might have some error codes stored. IIRC that little card in the cab has the procedure for accessing the codes. I think you hold down the headlight button...but I don't recall for sure.
 
   / Rabbit Speed
  • Thread Starter
#3  
I'll have to check that. Thanks
 
   / Rabbit Speed
  • Thread Starter
#4  
There are no error codes. It read "none" .Still digging into it.
 
   / Rabbit Speed #5  
Don't know why it would stop working if it was before, but look at the control panel setup (page SA-6 in the operation manual) under two speed set up.
 
   / Rabbit Speed
  • Thread Starter
#6  
That was it, don't know how it got turned off but going into that section and basically rest it to where it should be. The two speed works!! Thanks
 

Tractor & Equipment Auctions

2014 Ford Flex SUV (A50324)
2014 Ford Flex SUV...
Informational Lot - Shipping (A51039)
Informational Lot...
2021 ALLMAND BROS, INC. NIGHT LITE LIGHT TOWER (A50854)
2021 ALLMAND BROS...
2020 KUBOTA SSV75 WHEELED SKID STEER (A51242)
2020 KUBOTA SSV75...
2017 Ford F-550 Ext. Cab Valve Maintenance Truck (A50323)
2017 Ford F-550...
DEWALT ROTARY HAMMER (A50854)
DEWALT ROTARY...
 
Top